Rain Hoods
30-degree sloping roof for self-draining manufactured in 1 piece and bolts to existing Economy Enclosure using blind nut-serts to retain PI rating of IP65. Manufactured Powder Coated using Galvanized Z275 Steel and 316 #4 Stainless Steel.
Pindle Hinges
Stylish design to give a finished look. Manufactured in 316 Stainless and Chrome Plated. Includes screws. Other hinges available upon request.
Lift Off Hinges
Allows for quick, easy door removal. Can also be permanently installed. Manufactured in Zinc Alloy, Black Chrome, Bright Chrome and 316 Stainless Steel Finish. Other hinges available upon request.
T Handle Door Locks Large
Internal or external fixing and keyed KA92268 or non-keyed with clockwise or anti-clockwise opening. Material is steel with chrome plated finish.
T Handle Door Locks Small
Internal or external fixing and keyed KA92268 or non-keyed with clockwise or anti-clockwise opening. Material is steel with chrome plated finish.
L Handle Door Locks
Internal fixing and keyed or non-keyed with clock wise opening. Material is steel with chrome plated finish.
¼ Turn Wing Knob Locks
Quarter turn latch. Made in Zinc plated, and black powder coated. Rated IP65
Keyed flush locks
Keyed Flush Lock 268 Chrome 20mm 1/4 Turn
Spanner Lock 18mm
Chrome Plated finish. Different Barrel Inserts, 3mm Pin, 5mm Pin, 7mm Female Square, 7mm Square, 8mm Square (2mm slot), 8mm Square, 8mm Triangle, 2mm Slotted Head.
Spanner Lock Keys
Swing Handle Keyed and Pad Lock Kits
Can be used with 3 Point Locking system. Comes in Black Chrome, 316 Stainless and Chrome Plated finishes. Keyed 92268 or non-keyed.
D Handles
Door handles manufactured in 316 Stainless, Zinc Die Cast Chrome Plated and Plastic.
Door Stays
Heavy duty door retainer. Automatically locks at the open-end position. Left- or right-hand application. Can be retained with an opening angle of 90-degree, 105-degree, 120-degree and 135-degrees.
3 Point Locking
Suitable for larger enclosures to retain the top, centre and bottom of the door. Manufactured in Stainless and Zinc.
Document Holders
A4 Sized (260x205) holder mounted on the inside of the door of enclosures larger than 400sq to retain electricians required documents relevant to the enclosure.
Internal Slotted Din Rail
External Vent Plates
Pole Mounting Kits
Galvanized Channel Iron Plinths
Heavier gauge Plinth of various sizes but lower profile (70mm height) to suit the economy enclosure required. Manufactured using Australian Standard Black Mild Steel and then Hot Dip Galvanized.
Plinths
Lighter gauge Plinths of various sizes and heights to suit the economy enclosure required. These include cable access top and bottom. Manufactured using Australian Standard Galvanized Z275, Powder Coated or 304 and 316 #4 Brushed Stainless.
Inner Door and Escutcheon Kits
Designed to fit internally any standard Economy Enclosure. Simply bolts up to the 4 mounting studs located inside the enclosure. Comes with slotted mounting brackets to allow adjustment internally. Some enclosures may need modifications to accommodate installation of the kits. Each kit includes Polyamide hinges with counter sunk holes, nuts, washers and bolts.
Polycarbonate Door Windows
Clear 5.0mm Polycarbonate viewing window secured on the inside of the door using 3M VHB Double Sided Extreme Strength 0.6 mm Tape. Comes in 17 different standard sizes.
Extra Gland Plates for top cable entry
Gland Plates of various sizes to fit most Economy Enclosures. The Gland Plates are supplied with polyurethane seal to maintain the IP rating and are pre-punched to be able to mount using supplied stainless bolts, nuts and washers.
Lifting Lugs
Listing lugs designed to lift the more than the weight of the specified economy enclosure. Each lug is fixed to the enclosure roof section using 2 x M10 bolts and nut-serted opposite the direction of lift for added strength.
Special sizes made to order
Call our Technical Sales Department and we can offer Drafting Services and options to suit your needs.
A&B Industries also like to highlight their ability to manufacture non-standard equipment in:
Galvanised steel, stainless steel, aluminium, mild steel tubing etc.
Switchboards and general purpose enclosures complete with cut-outs, equipment mounting plates, rain hoods.
Powder coating of our products in any colour
Ducting and flashings
Galvanised protection cages in any size
Customer’s Support Poles as specified by SAPN Guide for Customer’s support poles
Guillotining, bending, punching, welding, CNC Turret Punching and CNC Plasma Cutting
Feel free to call us anytime during working hours for an obligation free quotation and assistance in design.